Spoon a écrit:Merci pour ce test qui n'est pas purement subjectif grace à ,plus ou moins, des témoins .
Beau boulot
c'est quelqu'un de tres tres bon conseils que tu denigre.
Pas bien
Modérateur: Equipe
Spoon a écrit:Merci pour ce test qui n'est pas purement subjectif grace à ,plus ou moins, des témoins .
Beau boulot
PAPS94 a écrit:Enfin quelqu'un qui ne parle pas dans le vent...!
Merci.
morin a écrit:HAaaa ... enfin un post avec de la matiére
stephen a écrit:The three screws may be glued. I don't know if it is OK to use big sccrew, since it will break the construction, but I think it is better to use allen screw. It will be easy to fasten or release.
Yes, I already asked the factory to update the side focus for 10-40 and 6-25. In future they will allow the turret rotates 300 degree instead of the present 180. So it will be more accurate for the clearance .
stephen a écrit: MP reticle is difficult, since they are from different factories. And the second plane retilce is different with the first plane one.
ernest a écrit: ....day use , for evening and night utilisation : the lowest red or green illumination is already too high for a real shot on poor illuminated target .
stephen a écrit: Illumination can be 11 levels. it is just a small case. .
ernest a écrit: 3-attenuate the milky vision under great magnification : it's come from the reflection of sunlight inside the 30mm tube . the paint used inside of the tube, and used within sunshades does not absorb enough sunlight parasites .
I had had to use 3 sunchades, placed end to end , to ameriorer greatly to the appearance of milky vision .
ernest a écrit: I hope that your next sending of 2 killflash for 50mm riflescope will help me to find a temporary solution .(until you sell the killflashs specially designed for your 56mm Riflescope) ..
ernest a écrit: for the r19 reticle : is it possible to remove the central point on your reticule mildot: this central point on your r19 prevents the precision of the target trap especially in FFP Riflescope. ..
blinder a écrit:tabarnak, le prix des vectors a augmenté en viarge, le mois passé 366$ canadien pour le 10-40x56mm, et aujourd'hui pour le même vector 487$ canadien, méchante hausse.
ernest a écrit:hello stephen,
mp reticle is not necessary , it's only to give the best features for your scoops .
the actual r19 on the 6-25x and similar to r19 on the 10-40x are great ( i didn't test yet the accuraty of theses 2 reticules under differentes magnifications , but it's secondary and not so important).
stephen a écrit:Hi,
OK, I will keep the original reticle.
yes, I talked about the reticle with the factory too. The adjustment of internal construction of 10-40x56 is better. The movement is just fit the integer. While, 6-25x56 is impossible to be produced like that. It is a pity.
There is no central dot for our Mil-dot. Please double check.
Red illumination. Mum, I will consider it in my next order.
Best Regards,
Stephen.
patrick57220 a écrit:Spoon a écrit:Merci pour ce test qui n'est pas purement subjectif grace à ,plus ou moins, des témoins .
Beau boulot
c'est quelqu'un de tres tres bon conseils que tu denigre.
Pas bien
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 36 invités